CCNA 2 v5.02 RSE Chapter 4 Exam Answers

1. What are two functions of a router? (Choose two.)

It connects multiple IP networks.*

It controls the flow of data via the use of Layer 2 addresses.

It determines the best path to send packets.*

It manages the VLAN database.

It increases the size of the broadcast domain.

2. In order for packets to be sent to a remote destination, what three pieces of information must be configured on a host? (Choose three.)

hostname

IP address*

subnet mask*

default gateway*

DNS server address

DHCP server address

3. Refer to the exhibit. A network administrator has configured R1 as shown. When the administrator checks the status of the serial interface, the interface is shown as being administratively down. What additional command must be entered on the serial interface of R1 to bring the interface up?

IPv6 enable

clockrate 128000

end

no shutdown*

4. What is one feature that distinguishes routers from Layer 2 switches?

Routers can be configured with IP addresses. Switches cannot.

Switches move packets from one physical interface to another. Routers do not.

Switches use tables of information to determine how to process data traffic. Routers do not.

Routers support a variety of interface types. Switches typically support Ethernet interfaces.*

5. Which command is used to configure an IPv6 address on a router interface so that the router will combine a manually specified network prefix with an automatically generated interface identifier?

ipv6 enable

ipv6 address ipv6-address/prefix-length

ipv6 address ipv6-address/prefix-length eui-64*

ipv6 address ipv6-address/prefix-length link-local

6. What type of IPv6 address is required as a minimum on IPv6 enabled interfaces?

loopback

unique local

link-local*

static

global unicast

7. What two pieces of information are displayed in the output of the show ip interface brief command? (Choose two.)

IP addresses*

MAC addresses

Layer 1 statuses*

next-hop addresses

interface descriptions

speed and duplex settings

8. When a computer is pinging another computer for the first time, what type of message does it place on the network to determine the MAC address of the other device?

an ICMP ping

an ARP request*

an RFI (Request for Information) message

a multicast to any Layer 3 devices that are connected to the local network

9. Refer to the exhibit. PC1 attempts to connect to File_server1 and sends an ARP request to obtain a destination MAC address. Which MAC address will PC1 receive in the ARP reply?

the MAC address of S1

the MAC address of the G0/0 interface on R1*

the MAC address of the G0/0 interface on R2

the MAC address of S2

the MAC address of File_server1

10. A packet moves from a host on one network to a device on a remote network within the same company. If NAT is not performed on the packet, which two items remain unchanged during the transfer of the packet from source to destination? (Choose two.)

destination IP address*

source ARP table

source IP address*

source MAC address

destination MAC address

Layer 2 header

11. What address changes as a packet travels across multiple Layer 3 Ethernet hops to its final destination?

source IP

destination IP

source Layer 2 address*

destination port

12. Which two items are used by a host device when performing an ANDing operation to determine if a destination address is on the same local network? (Choose two.)

destination IP address*

destination MAC address

source MAC address

subnet mask*

network number

13. Refer to the exhibit. What will the router do with a packet that has a destination IP address of 192.168.12.227?

Drop the packet.

Send the packet out the Serial0/0/0 interface.*

Send the packet out the GigabitEthernet0/0 interface.

Send the packet out the GigabitEthernet0/1 interface.

14. Which two statements correctly describe the concepts of administrative distance and metric? (Choose two.)

Administrative distance refers to the trustworthiness of a particular route.*

A router first installs routes with higher administrative distances.

The value of the administrative distance can not be altered by the network administrator.

Routes with the smallest metric to a destination indicate the best path.*

The metric is always determined based on hop count.

The metric varies depending which Layer 3 protocol is being routed, such as IP.

15. Refer to the exhibit. A network administrator issues the show ipv6 route command on R1. Which two types of routes are displayed in the routing table? (Choose two.)

static route

local host route*

directly connected network*

route that is learned through the OSPF routing protocol

route that is learned through the EIGRP routing protocol

16. Refer to the exhibit. A network administrator issues the show ipv6 route command on R1. What two conclusions can be drawn from the routing table? (Choose two.)

static route*

local host route

directly connected network*

route that is learned through the OSPF routing protocol

route that is learned through the EIGRP routing protocol

17. A network administrator configures the interface fa0/0 on the router R1 with the command ip address 172.16.1.254 255.255.255.0. However, when the administrator issues the command show ip route, the routing table does not show the directly connected network. What is the possible cause of the problem?

The interface fa0/0 has not been activated.*

The configuration needs to be saved first.

No packets with a destination network of 172.16.1.0 have been sent to R1.

The subnet mask is incorrect for the IPv4 address.

18. A network administrator configures a router by the command ip route 0.0.0.0 0.0.0.0 209.165.200.226. What is the purpose of this command?

to forward all packets to the device with IP address 209.165.200.226

to add a dynamic route for the destination network 0.0.0.0 to the routing table

to forward packets destined for the network 0.0.0.0 to the device with IP address 209.165.200.226

to provide a route to forward packets for which there is no route in the routing table*

19. A network administrator is implementing dynamic routing protocols for a company. Which command can the administrator issue on a router to display the supported routing protocols?

Router(config)# router ?*

Router(config)# service ?

Router(config)# ip route ?

Router(config)# ip forward-protocol ?

20. Refer to the exhibit. A network administrator issues the show ip route command on R2. What two types of routes are installed in the routing table? (Choose two.)

a configured default route

directly connected networks*

routes that are learned through the OSPF routing protocol

routes that are learned through the EIGRP routing protocol*

a configured static route to the network 209.165.200.224

21. Refer to the exhibit. What is the purpose of the highlighted field in the line that is displayed from the show ip route command?

It indicates that this is a default route.

It indicates that this route was learned via EIGRP.*

It indicates that this is a directly connected route.

It indicates that this route has been deleted from the routing table.

22. Which statement describes a route that has been learned dynamically?

It is automatically updated and maintained by routing protocols.*

It is unaffected by changes in the topology of the network.

It has an administrative distance of 1.

It is identified by the prefix C in the routing table.

23. Fill in the blank.

When a router receives a packet, it examines the destination address of the packet and looks in the Routing table to determine the best path to use to forward the packet.

24. Refer to the exhibit. Match the description with the routing table entries. (Not all options are used.)

172.16.2.2 -> next hop
10.3.0.0 -> destination network
21024000 -> metric
1 -> administrative distance
00:22:15 -> route timestamp
D -> route  source protocol